Water Pumps - External » Leaf Traps

If you will be using any of the Sequence 750 or Sequence 1000, PerformancePro Cascade, Watertways Executive, Iron Might or Tiny Might pumps, and are planning on placing the pump before the filtration system, it is required by the manufacturers to have a leaf trap/priming pot in order for your warranty to be valid.

To use this Leaf Trap with any pump other than a Waterways or Wave pumps you will need an adapter below.

This Sta-Rite Leaf Trap is capable of conecting 1.5 in. pipe or a 2 in. conector on the intake/pond side. On the pump side it uses a 1.5 in. conector.

This item is no longer available

Tired of constantly cleaning your small leaf trap? This ultra large leaf basket solves the problem. The internal baskets are 7.25" in diameter by 8",15" or 30" tall. Larger than a standard leaf trap the housing is 10" in diameter by 15", 27" or 39" tall. Input and output plumbing fittings are 2" slip x slip unions. Made in USA. ( Mega Strainer ll pictured )

*This is a special order item, which has a lead time of about 1 to 2 week until it is shipped.*